Sentence examples for cladding conditions from inspiring English sources
From the confirmation experiment, the average deposition efficiency of 12.3% was achieved at the optimized cladding conditions as statistically predicted.
The optimal cladding conditions in the experimental range were obtained at 0 mm of the powder feed position, 50° of the powder feed angle, 0.62 g/s of the powder feed rate and 6.7 mm/s of the travel speed.
The normalizing process not only increased the bonding strength between the clad layer and the matrix, but also improved the wear performance of the clad layer under all cladding conditions.
Laser clad specimens were fabricated to characterize the axial fatigue failure behavior of laser clad 4340 steel in the as-clad condition and for specifically designed clad specimens with pre-clad machining and post-clad surface grinding processes.
Depending on the coating material, this re-heated zone (RHZ) can exhibit different wear rate compared with the other area of the track in the as-clad condition, which is especially significant for the CPM 10V coating.
Perhaps the stockholders of Disney, Viacom, News Corp and Time Warner, etc, should insist that from now on, flying coach should be an iron-clad condition of their CEOs' contracts.
This paper contemplates the thermal behavior of small cabins with reflective coatings on both interior and exterior cladding, under different conditions and climates with the aim to clarify and point out to the potential energy saving by smart choices of clad coatings.
The purpose of this work is to design an irradiation vehicle for testing silicon carbide (SiC) fiber-reinforced SiC matrix composite cladding materials under conditions representative of a light water reactor in order to validate thermo-mechanical models of stress states in these materials due to irradiation swelling and differential thermal expansion.
Such a structural-phase state becomes feasible by combining the electron-beam cladding and heat treatment conditions.
The optimal process conditions of cladding crack free Tribaloy T-400 coating on different steel substrates were obtained.
The purpose is to evaluate the most promising ATF candidate material FeCrAl, which has excellent oxidation resistance, as fuel cladding under normal operational conditions.
