Sentence examples for cladding application from inspiring English sources

Leading technology development of ODS steels has been conducted at the Japan Nuclear Cycle Development Institute (JNC) particularly emphasizing fuel cladding application for fast reactors.

The Fe-25Cr-22Ni-0.046C-0.73Mo-0.18Nb-0.34Ta (wt%) exhibits excellent mechanical property due to its higher microstructural stability at 973 K, which has great potential for fuel cladding application.

The resultant curauá-reinforced composites are promising construction materials for building façade and cladding applications based on their lightweightedness, low thermal conductivity, and material toughness derived from a combination of tensile strength and tensile ductility.

This makes it of great advantage in weld cladding applications.

Chemical vapor deposition (CVD) techniques have been evaluated for fabrication of free-standing 0.25 mm thick molybdenum tubes with the end goal of nuclear fuel cladding applications.

Silicon carbide (SiC) is being investigated for accident tolerant fuel cladding applications due to its high temperature strength, exceptional stability under irradiation, and reduced oxidation compared to Zircaloy under accident conditions.

Characterization of the tubes produced in this manner revealed regions of material with fine grain microstructure and wall thickness suitable for fuel cladding applications, but lacking necessary uniformity across the length of the tubes.

NF616 is a nominal 9Cr ferritic martensitic steel that is amongst the primary candidates for cladding and duct applications in the Sodium-Cooled Fast Reactor, one of the Generation IV nuclear energy systems.

One of the vital problems limiting the application of multi-layer cladding coating is that there appears a coarse grain structure at interface between different layers.

A number of materials are currently under development as candidate accident tolerant fuel and cladding for application in the current fleet of commercial light water reactors (LWRs).

The present paper studies the application of cladding techniques to repair moulds such as those used in the plastics industry.