Sentence examples for clad surface from inspiring English sources

Slightly smaller values of average clad surface temperature are obtained using coated fuel pellets as compared to UO2.

Most laser clad surface layers on aluminium alloys consist of a hard carbide phase and an aluminium alloy matrix phase.

The results of erosion wear studies of the WC-Ni laser clad surface revealed that the erosion behaviour of the WC-Ni laser clad is primarily governed by erodent jet velocity followed by impact angle.

TiC particulates are uniformly dispersed in the clad surface.

The maximum clad surface temperature has been predicted in different cases by using the thermal hydraulic safety code RELAP5/Mod4.0.

The results show that, this concept has potential benefits in reducing the clad surface temperature and increasing the life cycle length.

Laser clad specimens were fabricated to characterize the axial fatigue failure behavior of laser clad 4340 steel in the as-clad condition and for specifically designed clad specimens with pre-clad machining and post-clad surface grinding processes.

A method used to clad the inner surface of steel tubes with Al foils has been developed: Al foils were welded onto the inner surface of steel tubes by ball attrition in planetary rotation, followed by annealing at 660 °C for 20 min.

Structure and atomic composition of surface clad layers were analyzed by X-ray diffrandion and energy dispersive X-ray spectroscopy, respectively.

The results show that original spray powders were thermally protected by the layer of magnesium oxide clad on their surface that acts as a sacrificial material.

At 1,368 feet, with 23 acres of glass-clad surface area, 1 World Trade Center will be subject to tremendous natural forces.