Sentence examples for circumferential length from inspiring English sources

The position, blade number, and circumferential length are then investigated when the turbine is mounted on a building.

Finally, the circumferential length, opening distance and the profiles of the deformed strip are measured on the cage roll-forming mill.

The circumferential length and the horizontal distance between two deformed strip edges were obtained from the simulation and were compared with the experimental data from a production line.

Simulation results show that by increasing the initial strip width, more circumferential length reduction is induced to the deformed strip in the fin-pass stands.

Increasing demands for electric resistance welded pipes of high quality with thick wall require close investigations in edge deformation by slitting, strip deformation during break down forming, and difference of circumferential length.

The Prague C & M criteria, developed for the endoscopic grading of Barrett's esophagus (BE), (C = circumferential length, M = maximal length) were previously validated among a panel of 29 expert endoscopists with a special interest in BE.

The akinetic region of the myocardium was calculated as the sum of the endocardial and epicardial circumferential lengths of the thinned, akinetic region of all slices, measured at diastole, and divided by the sum of the total endocardial and epicardial circumferences of all slices (36).

A linear flow velocity of 5 cm/min was obtained using four on-board pumps in a closed loop of circumferential track length of 10 cm (channel cross section of 0.5 mm × 0.5 mm), whereas it dropped to 1.8 mm/min in a packed bed column operated by a single pump.

Parametric studies are made to analyse the effects of circumferential node number, length ratio and cone angle on the frequency parameter for different number of layers and materials with different ply orientations under two types of boundary conditions.

(3) Success Rate inside (OR outside ) = ∑ CWD bear sign & gallery present ∑ CWD bear sign present We calculated the volume of each individual CWD item (area calculated from circumferential radius × length), the average CWD volume per plot and per clearcut, and we extrapolated plot count data of galleries, bear sign, and CWD to per hectare values for each clearcut.

In addition, frequency characteristics of thin and thick shells are investigated with respect to the variations of rotating speeds, circumferential wave numbers, and length and thickness ratio.