Sentence examples for circumferential failure from inspiring English sources

The monthly circumferential failure rates formed a cyclic pattern that occurred in September and January.

The circumferential failure mode of spot welds is investigated under combined loading conditions.

A close correlation was derived from the circumferential failure rate pattern and the monthly weather changes, including mean temperatures, precipitation, and depth of snow cover.

The approximate limit load solution for circumferential failure is expressed in terms of sheet thickness, nugget diameter and combinations of loads.

Mean circumferential failure strains and stresses in the inner culm surface were: 6693 με and 7.6 MPa; 13137 με and 12.1 MPa; and 5948 με and 3.7 MPa for Moso, Tre Gai and Guadua respectively.

Distensibility was greatest in unidirectional circumferential UBM with failure extension occurring at 14.77 ± 1.66 mm.

Mean fracture load was 5.6 ± 2.1 N, and mean circumferential stress at failure was 9.5 ± 4.1 MPa.

In this paper, friction, crazing, circumferential expansion and tearing failure mechanisms were introduced and applied successfully to control the response of energy absorbing system to the applied load.

In this study, a novel model is proposed which combines a mechanical earth model, borehole circumferential stresses, Mogi-Coulomb failure criteria and simulation of pore pressure variation near wellbore to determine the optimum well trajectory during drilling and production in a condensate offshore reservoir.

Furthermore, the circumferential welds present much smaller failure probabilities.

The initial curvature of sandwich shells may induce easily tearing failure along their circumferential directions.