Sentence examples for circulation of solid from inspiring English sources

Spouted beds provide a means of good hydrodynamic conditions and circulation of solid particles.

Above the injection level, more particles are brought upward and the circulation of solids is promoted.

Conditions to minimize gas leakage between the interconnected beds, avoiding insufficient circulation of solids, have been experimentally determined.

The simulations confirmed that the height of the annulus is a key factor for the control of the circulation of solids.

The constant velocity and angle of a subducting slab are assumed to drive the circulation of solids in the mantle wedge by the process of dragging; for simplicity, mantle rheology is assumed to be isoviscous.

The results show that solid circulation is constructed in the two chambers with the formations of three local circulation rolls of solid motion.

To discuss clogging phenomena quantitatively, the relative rates of deposition and fine formation were defined as the ratios of the total deposition rate and fines formation rate to the circulation rate of solid in the annulus.

The circulation of inert solids transmits the heat from the combustion zone into the gasification zone.

Oscillations in the concentration response, resulting from the gross circulation of the solids, have been observed experimentally.

The internal circulation of the solids (spherical particles, with diameter of 1.2 mm and density 1000 kg/m3) is modeled to clarify the flow characteristics of the bed for different design or operating parameters, such as superficial gas velocity, gap height, inclination angle of the gas distributor, baffle plate or side wall of the bed.

The influence of the circulation rate of solids, the load of fuel gas, the reactor temperature and size of the oxygen-carrier particles were analyzed.