Sentence examples for circulating coolant from inspiring English sources

The revved-up guts require pipes with circulating coolant.

And the PEMFC temperature and circulating coolant inlet temperature are controlled by regulating the circulating coolant flux and bypass valve factor respectively.

Generally circulating coolant can be applied in removing the excess heat of the PEMFC whose electrical power exceeds 5 kW.

The calorimeter consisted of two thermoelectric heat flux sensors connected to a data acquisition system, two identical and cold plates fed with a circulating coolant, and an electrochemical test section connected to a potentiostat/galvanostat system.

Although liquid cooling is more complicated, and extra cooling power may be needed to cool down the circulating coolant, the temperature increment of liquid coolant through cooling channel is insignificant for cooling 20 TEG modules producing about 250 W of power.

Pressure of the reactor was constant over 160 min while the temperature of the system was fixed at 4 °C due to the circulating coolant.

Zirconium has good strength at elevated temperatures, resists corrosion from the rapidly circulating coolants, does not form highly radioactive isotopes, and withstands mechanical damage from neutron bombardment.

A heat exchanger that can perform as such would be advantageous for use in advanced reactor concepts where primary coolant flow reversal is expected during Loss-of-Forced-Circulation (LOFC) accidents where the ability to circulate coolant is compromised.

Rather than using electrically operated pumps and motors to circulate coolant and keep the core of the nuclear reactor at a low temperature, as happens in traditional plants, small reactors use no pumps and motors and instead rely on passive means such as gravity and conduction ­­to cool the reactors.

Years later, Japanese automakers began to clean up wiring harnesses and the plumbing needed to circulate coolant as a way to suggest economical efficiency, while high-end German automakers were early adopters of full covers on V-8's and V-12's to imply technological precision.

Running from the condensing unit and into the house, Mr. Bellini said, are a pair of tubes that circulate coolant to the part of the system known as the evaporator coil, which is typically placed in retrofit situations in the attic.