Sentence examples for circuit pressure from inspiring English sources

Bipolar plate layout, active area surface and shape, maximum (OCV) and minimum voltage, maximum cooling circuit pressure drop, maximum cathodic flow-field pressure drop, were the main constraint that influenced the constructive solutions.

This problem can be circumvented by introducing a pressure-release valve into the ventilator circuit that dumps circuit pressure above a set threshold [ 24].

Triggering refers to the mechanism by which a patient's inspiratory effort initiates a response from the ventilator, through either a decrease in the ventilator circuit pressure (pressure trigger), or the presence of an inspiratory flow (flow trigger).

We collected patients' characteristics, filter life time, circuit pressures, interruption of therapy duration and reasons (alarm types), achieved and targeted renal dose, metabolic parameters (serum creatinine and potassium levels and arterial base excess).

Circuit pressures are constantly monitored in every part of the circuit (pre-pump or access pressure, pre-filter, effluent).

Blood pump speeds were set between 100 and 250 ml min-1 depending on the quality of the vascular access and circuit pressures.

The albumin pump speed was maintained at 150 ml min-1 unless circuit pressures were excessive, in which case the pump speed was reduced.

The specific effects of mobilization on the vascular catheter, circuit pressures, fluid dynamics and blood flow in patients receiving CRRT via dual-lumen femoral vascular catheters are uncertain.

The water wall system is treated in this paper as a network consisting of circuits, pressure grids and connecting tubes.

The water-wall system with complicated pipe arrangement is regarded as a network consisting of series-parallel circuits, pressure nodes and linking circuits, which represent vertical water-wall tubes, different headers and linking tubes, respectively.

The mass flux in circuits, pressure drop between headers, outer vapor temperature of water-wall system and metal temperature data of tubes at the boiler maximum continuous rating (BMCR), 75% BMCR and 30% BMCR loads are obtained by solving the mathematical model.