Sentence examples for chip lengths from inspiring English sources

Table 2 shows the BER results expressed as a percentage of the total number of watermark bits for the two chip lengths and for each signal manipulation operation.

However, chip length settings can be adjusted for obtaining different commercial products.

This study tested the same modified forager designed for producing 30-mm chips, under variable chip length settings.

The MNP chip length FOM is below unity (data clipped), due to the inherent losses in the link requiring high laser powers.

In that regard, it is important to determine the trade-offs of chip length manipulation, which may affect machine performance.

Reducing target chip length below 30 mm doubled or even quadrupled the proportion of fine particles (<3 mm) in the total chip mass, which detracted from chip quality.

In particular, chip length setting was adjusted both downwards to a minimum length of 5 mm (microchips), and upwards to a maximum length of 90 mm (billets).

Downward alterations of chip length setting resulted in a steady performance decline, which peaked at the shortest length setting (5 mm).

In contrast, upward alterations of chip length setting resulted in an immediate and moderate decay of machine performance at the very first increment, followed by the absence of further significant decline as additional increments were introduced.

The maximum chip thickness (s) and chip length (L) are calculated from the characteristics of the hobbing process by using equations by Hoffmeister 1970.

The Time Division Synchronous Code Division Multiple Access (TD-SCDMA) time frames, time slots, and bursts structure appear in Figure 4[14], where Tc = 12.5/16 μs denotes the chip duration; cyclic prefix (CP) denotes the chip length; chips denote the number of the chips.