Sentence examples for chip forming from inspiring English sources
Furthermore, manufacturing simulations are numerically complex as the chip forming zone can only be described via the intersection of curved surfaces.
Wavelength division multiplexed transceivers with eight wavelength channels are monolithically-integrated on a single chip, forming an optical network-on-chip circuit with total transmission capacity up to 8 × 8×40 Gbps, and bandwidth density over 2 Tbps/cm.
The aim of the RELAXd project (high REsolution Large Area X-ray Detector) is to develop a high frame-rate, fully 3D-integrated microsystem, consisting of four Medipix2 readout chips bump-bonded to one silicon sensor chip forming the basic building module.
The non-uniform metal removal process, including chip forming and ploughing, introduced deep grooves on the ground surfaces.
Using lubrication during grinding operations can help to retain abrasive grit sharpness, reduce friction between abrasive and workpiece material, and contribute to a favorable mode of chip forming, thus reducing the normal force (Paul and Chattopadhyay 1996).
A lower machine power means a lower (normal) grinding force, which led to more rubbing instead of the effective metal removal processes chip forming, cutting, or ploughing, as demonstrated by the results in Fig. 4.
It is demonstrated that such chip forms accelerate attrition wear especially in carbide tools.
Their school had for a while been an incubator of young British bands – electropop outfit Hot Chip formed there in 2000 – and pupils tended to be musical.
An nanoscale energetic material (nEM -on-MWCNTs paper chip formed by depositinEM -on-MWCNTs film onEM -on-MWCNTsoated paper elechipde could be stably ignited by applying voltages higher than ∼ 15 V.
The study revealed that in a traditional cutting process, the chip formed by a fresh cutting edge is larger than that by a worn cutting edge, and that friction-induced bending fracture can occur in a machined subsurface as the tool wears out.
Resultantly, there is chip formed in the front of cutting tool.
