The embedded chip dimension of the Y2K problem surprised many companies.
The chip dimension, the imager noise, and dynamic performance make it suitable for use in endoluminal applications both in the visible and NIR regions.
In addition, the influences of nitrogen gas flow rate, the chip dimension and the carboxyl end-group concentration of the PET prepolymer on the molecular weight of PET after SSP, and the change of the EG concentration of PET chips with reaction time were also studied by simulation.
It was a complementary metal oxide semiconductor (CMOS) monochrome image sensor; its full chip dimension was 512 × 512 pixel, and the pixel size was 16 × 16 μm.
In this work, the strength and fracture behaviour of miniaturised Si chips (dimensions: 2 mm × 2 mm × 0.125 mm) has been assessed under biaxial loading on both the pure silicon side and the metal-patterned side by means of a miniaturised ball-on-three-balls (B3B) fixture.
Each of these options has its merits and penalties with respect to metrics of interest such as delay, energy per bit, bandwidth, pitch, form factor and multi-chip dimension for different interconnect lengths.
Microelectromechanical system (MEMS), mechanical parts and electronic circuits combined to form miniature devices, typically on a semiconductor chip, with dimensions from tens of micrometres to a few hundred micrometres (millionths of a metre).
The crystals of topaz were cut into chips of dimensions compatible to the commercial TLD readers.
The samples of topaz from this mine were cut into square chips of dimensions 3.2 × 3.2 mm with thickness 0.9 mm, which are suitable for the TLD reader.
In the present work, a micro-thruster chip with dimension of 19.5 mm × 9.5 mm was fabricated with MEMS technologies for the experiment study of vaporizing liquid micro-thruster.
