The model expresses the short-run cost per unit of operating the SPRT chart as a function of the cost parameters associated with the operation.
The interface strengths of all the measured samples were combined into one empirical equation that can be used as a basis to construct strength charts as a function of exposure conditions.
The fluid effective diffusion coefficients under first-order-reaction condition were calculated at zero flow rates and shown in chart as a function of fluid and intraparticle diffusivities and Thiele modulus.
To produce a zone distribution where the periportal and perivenous zones both occupy 33.2% of the cell volume each, the BAL should be operated with a plasma flow rate Qeq, given in the chart as a function of device fiber number (Fig. 7B).
The stability chart obtained as a function of asymmetry parameters and rotor speed reveals a complex evolution of critical zones and the existence of bifurcation points at low rotor speed values.
The economic model expresses the long-run cost per time unit of operating the combined VSI EWMA and VSI X chart scheme as a function of its design parameters, the parameters that describe the behavior of the process, and the cost parameters associated with the operation of the scheme.
A design chart for λ as a function of νhv is proposed.
Convergence charts of ACH as a function of an increasing number of surrounding building layers are generated using various urban parameters (e.g., wind condition, aspect ratio, building height relative to surroundings, downstream obstacles, and non-idealized surroundings).
A practical example and charts of Φ as a function of the degree of monitoring (percentage of piles monitored in a group) are used to demonstrate and discuss results.
In contrast to traditional fixed sampling interval (FSI) control charts, variable sampling interval (VSI) charts vary the sampling interval as a function of the process data, thus detecting many process changes substantially faster than their FSI counterparts.
