Sentence examples for characteristics degradation from inspiring English sources

P-shielding TMOS also has the drawback of on-state characteristics degradation corresponding to off state improvement for minimum design rule.

Relevant indicators of vast soil degradation and erosion include texture and porosity spoilage (Figueiredo et al., 1999; Jankauskas et al., 2008), water retention capacity decline (Ye et al., 2011) and soil leanness accompanied by chemical and biologic characteristics degradation (de Paz et al., 2006) have also been studied.

(1) For the one-piece dielectric radome (9.14 m radome), more than 60% phase difference caused by radome is reduced, and more than 80% of the radiation characteristics degradation is compensated by the proposed compensation method, since the main reason of the degradation is the phase difference of the radome.

Several abnormal characteristics degradations were observed.

In fact, the commonly associated mechanisms responsible for the dynamic characteristics degradations are the generation of a damage region at the metal interfaces (metallurgic interactions) [10, 11].

For emerging ultra-scaled transistors, the characteristic degradation induced by interface traps at the interface of SiO x /Si is severe for giga-scale circuit designs [7].

The significant dependence relationship of ITs-fluctuated SS versus DIBL indicates that the characteristic degradation was caused by an even stronger short-channel effect [29].

Also, the analysis of samples is a powerful tool to identify any agent that may be present, even if in small concentrations, or of characteristic degradation products that would demonstrate its past presence.

They would collect environmental samples such as soil, rubble or vegetation that may have been in contact with the chemical warfare agent and may still contain characteristic degradation products or even traces of it.

In fact the chromatogram of filter paper with aged linseed oil shows the characteristic degradation products peak of cellulose around 3 min and a region rich in acidic components between 3.5 and 9 min (the results were compared with the chromatograms obtained for water extract of aged pure cellulose and salts of alkaline reserve – data not shown).

In summary, when the ex situ annealing temperature increased from 350 to 400 °C, i-PMA characteristic degradation (i.e., PMA magnetic moment decrease) of the Co2Fe6B2 pinned layer was much severer for the p-MTJ spin valve with a nanoscale-thick bottom Co2Fe6B2 free layer than the p-MTJ spin valve with a nanoscale-thick top Co2Fe6B2 free layer.