Sentence examples for changing the thermal from inspiring English sources
The cases of homogeneous and non-homogeneous temperature were studied by changing the thermal parameters.
Doors can create this situation when they are opened by changing the thermal boundary conditions of indoor spaces.
An engineered aluminum foil was developed to absorb the expansion of the cladding tubes, due to irradiation swelling, without changing the thermal resistance of the gap between the cladding and irradiation capsule.
The data has been used to build and validate an IDA ICE simulation model in order to study possible improvements in energy consumption by changing the thermal mass and the ventilation strategies.
By contrast, changing the thermal conductivity of the heat pipe made little difference because the effective thermal conductivity of the metal beds was typically much smaller than that of the heat pipe.
The relative importance of creep and superplastic deformation upon foaming rate, rate of porosity opening and maximum porosity was studied by changing the thermal cycling frequency and maximum temperature.
Interlayer distances of GO were changed by intercalation of three kinds of diaminoalkanes with a different number of carbon atoms (NH2(CH2)nNH2, n = 2, 6, 10) as pillars and changing the subsequent thermal annealing conditions.
As can be seen clearly from Table 3, by changing the grout thermal conductivity (cases 1 and 2) and keeping the same all the other parameters, we obtain different results because of the different borehole thermal resistances linked to the grout conductivity.
Finally, under the condition of a given topology optimization ratio, the thermal-stress coupled topology optimization is applied by changing the proportion of the thermal load to the stress load.
Compared with previous thermal rectifiers, reverse modulation can be obtained by changing the width of the thermal terminal.
The simulation results indicate that the heat flux around the interface has exhibited fantastic changing characteristic, the thermal insulation effect of TBCs would be enhanced with the area of the interface increasing.
