Sentence examples for changes of specimen from inspiring English sources

In particular, thermal shock resistance tests are conducted with changes of specimen thickness, with laser source irradiated at the center of the specimen.

Dimensional changes of specimens occurring during sintering were controlled by dilatometry.

Figure 1 presents relative elongation changes of specimens ΔL/L as a function of temperature measured along the three directions (X, Y and Z).

Accompanied with this phase transformation, the dimensional change of specimen is inevitable.

The change of specimen mass is recorded in the drying process, and the compressive strength and splitting tensile strength are measured after the natural cooling.

Therefore, the eccentrically applied moment will vary due to the change of specimen stiffness resulted from different surgical reconstruction procedures.

The results indicate that the volumetric change of specimens are in the same order of magnitude even when the content of CFA comes up to 80%.

Mass changes of the specimen were recorded every 100 cycles.

Soaking and pressure-bearing tests exhibited no visual changes of a specimen treated with the drilling fluid, which confirmed the result of optimization.

At key points A, B, C, and D, the sensing coil senses changes of the specimen, indicating the moment that the magnetic field of each coil is first disturbed by the crack.

Whereas the permanent changes of the specimen length were found after the first thermal cycle for the as-cast composites, only the reversible changes of the dilatational strain were observed after the second and subsequent cycles.