Sentence examples for changes of failure from inspiring English sources
The results disclosed strong temperature effects on the penetrated behaviors of aluminum foam sandwich plates, and reveal the changes of failure modes at elevated temperatures.
The changes of failure mode, neutralization depth, strength loss of concrete, corrosive rate of rebar and the expansive crack width were tested.
This comparison shows that the design method compares well with experimental results and is generally conservative, although it is in need of development to account for the bond characteristics of reinforcement and changes of failure mode for some orthotropically reinforced slabs.
The change of failure modes for these two conditions suggests the dependence of pull-out strength more on epoxy properties.
Eighteen months wet dry series (GH4) experienced change of failure modes from thin concrete to thicker concrete layer attached to the debonded FRP.
(3) Increasing the width of steel plate and decreasing the anchor bolt spacing resulted in change of failure mode from steel yielding to premature failure attributed to the anchor bolt hole.
Slight reduction of pull-off strength was observed after 14 years of exposure but the peel test showed much deviation of strength due to outdoor environment and change of failure modes.
Accelerated ageing tests resulted in a change of failure mode in GFRP-strengthened specimens which helped in assessment of AE output in different failure modes, but no conclusive strength degradation was observed in the specimens.
From the comparison of failure modes of all temperature series (Fig. 8) with the control series (Fig. 7), the change of failure patterns with duration of exposure deemed to be insignificant as the failure always occurred mostly in the concrete adjacent to the epoxy layer.
The changes of ultimate failure mode and the damage process were observed.
"Shoulds" also mask fear and guilt - fear of change, fear of failure, and guilt about not living up to other people's expectations.
