Sentence examples for changes in the deflection from inspiring English sources

The sensing principle is based upon changes in the deflection induced by environmental factors in the medium where a microcantilever is immersed.

A change in the deflection of the bridge due to the presence of damage manifests itself as a change in the apparent profile associated with the measured vehicle response.

The change in the deflection from mesh #3 to #4 was found to be negligible enough.

In addition, complications may be identified earlier if a sudden change in the deflections are seen, indicating a decrease in overall stability.

As shown in Table 4, there appeared to be little changes in the induced deflection and stresses at the joint due to the different dowel bar arrangements.

Most of the topographic images are obtained in contact-mode AFM, in which the cantilever is in touch with the sample incessantly during scanning; changes in the cantilever deflection are monitored and kept constant using an electronic feedback loop (7, 8).

Changes in this deflection have previously been identified as the N270 ERP component.

The changes in the sign of deflection are well accounted for in terms of the combined effects of the increasing compressive stress development due to the substitution of chloride ion for oxygen vacancy and of the increasing tensile stress development due to the cation vacancy accumulation at the metal/oxide film interface with increasing chloride ion concentration.

A model developed in this view shows that, depending on the position of the reinforcing layer, a substantial change may result in the deflection vs. temperature relationship.

On changing the incidence angle by a few degrees, the deflection changes in the arcsecond range.

Microcantilever sensors offer high sensitivity in the detection of adsorbed molecules based either on resonance frequency shift or changes in cantilever deflection, as both of these signals can be detected with very high resolution.