Sentence examples for change of specimen from inspiring English sources
Accompanied with this phase transformation, the dimensional change of specimen is inevitable.
The change of specimen mass is recorded in the drying process, and the compressive strength and splitting tensile strength are measured after the natural cooling.
Therefore, the eccentrically applied moment will vary due to the change of specimen stiffness resulted from different surgical reconstruction procedures.
The results indicate that the volumetric change of specimens are in the same order of magnitude even when the content of CFA comes up to 80%.
In particular, thermal shock resistance tests are conducted with changes of specimen thickness, with laser source irradiated at the center of the specimen.
Dimensional changes of specimens occurring during sintering were controlled by dilatometry.
Figure 1 presents relative elongation changes of specimens ΔL/L as a function of temperature measured along the three directions (X, Y and Z).
In contrast, (t_{text {HAADF-STEM}}) increases linearly and thus suggests a linear thickness change of the specimen.
This function supposes that the internal energy change of a specimen is a constant from the initial state to the failure one under certain conditions.
The local plastic deformation induced by transformation plasticity results in an anisotropic volume change of the specimen in the longitudinal direction.
The parameters which correspond to the resistance change of the specimen due to damage in quasi-static and cyclic tests are used to evaluate the damage state in the material.
