Sentence examples for chamfered angle from inspiring English sources
The predicted results from numerical simulation of fluid flow, heat transfer and solidification in the conventional mold and the chamfer mold show that the increased chamfered angle leads to an approximately linear increase of the slab surface temperature, but it also causes strong flow near the slab corner.
At the same chamfered angle of 30°, when the chamfered length is controlled between 65 85 mm, the tangential strain on the part of the slab edges and corners is relatively smaller.
The calculated results from the finite element analysis of stress-strain during the straightening process show that at the same slope width, the tangential strain on the slab edges and corners is minimum when the chamfered angle is 30° and 45°, which is only 40% to 46% of rectangular slabs with the same cross-section area.
A parametric study based on both chamfered angles leads to an optimized Ahmed geometry having a drag of 5.8% lower than the reference squareback model.
The taper tap has 7 to 10 chamfered threads; the plug tap has 3 to 5 threads chamfered; while the bottoming tap has one thread chamfered.
The corners of the building are gracefully chamfered as they rise to the top and the oriel windows are chamfered at their base.
It is observed that the internal chamfered whistles exhibit higher directivity than the external chamfered ones.
Cutting is accomplished by a chamfered edge at the end of each flute.
There is one closed square silver key with curved chamfered edges and incised lines.
