Sentence examples for cf content from inspiring English sources

The addition of CF has no effect on the corrosion level of the steel bar at the early stage when the CF content is lower than the CF percolation threshold, while the corrosion level tends to increase when the CF content is higher than the CF percolation threshold.

It rises when the CF content is 0.8 wt.%.

The mesopore diameter of the C/C composites increases slightly with the increase of CF content.

The CF content dependence of correlation length was related to the onset of PTC effect.

When the CF content is higher than 0.2%, freezing thawing cycles can decrease the wave absorbing property of the composites.

However, heat of fusion and the relative degree of crystallinity values of composites decreased with ascending CF content.

In this paper, specimens of the composites with different carbon fiber (CF) contents were prepared.

Foamed and solid polypropylene/carbon fiber (PP CF) composites containing various CF contents (0 10 vol.%) were injection-molded.

To interpret this phenomenon, a master curve of temperature frequency resistivity superposition was constructed for composites with different CF contents based on the AC resistivity.

Results show that the reflectivity varies slightly before and after freezing thawing without any CF. In the lower frequency bands, the reflectivity of the composites with different CF contents increases obviously after freezing thawing cycles.

Two important results were observed; firstly the moderate CF contents (75, 65 and 55 vol.%) proved to be the most effective in manifold increase in mechanical strength of PEI and secondly, the composites with fabric in the direction normal to sliding plane led to very high coefficient of friction.