Sentence examples for ceramic feedstocks from inspiring English sources

Three alumina-based ceramic feedstocks with different types and amount of second phases were developed.

In the framework of a comprehensive study of the ceramic feedstocks in molten conditions, the viscoelastic behavior of zirconia-filled polymers has been studied over a broad span of particle concentrations (from 0 to 42 vol% i.e., from 0 to 82 wt%).

For the manufacturing of reaction-bonded ceramic microparts by low-pressure injection moulding, feedstocks with an optimized rheological behaviour are required.

In the SPPS process, an aqueous chemical precursor feedstock, which results in a ZrO2 7wt.%Y2O3 ceramic solid solution coating, is injected into the plasma jet and the coating is deposited on a metal substrate.

Some of the other projects involve the development of proton exchange membrane for fuel cell application, a gyroscope based on micro-electromechanical technology and research on innovative engineering materials to fabricate ceramic membranes that can partially oxidize methane to syngas used as feedstock in commercial methanol production.

Suspension plasma spraying (SPS) is a modification of plasma spray processes that uses small feedstock powders suspended in a liquid to rapidly produce fully sintered, thin ceramic coatings with good microstructural control and no need for post-deposition heat treatments.

This paper reports how microstructural information, obtainable for thick free-standing thermal-spray (plasma-sprayed) ceramic deposits by small-angle scattering, can be used to explore the relationships among the feedstock or spray process conditions, the anisotropic void and crack microstructures of the deposits, and technologically important deposit properties such as thermal conductivity.

It was revealed that the chemical environment of the alumina component, as well as the inherent elementary distribution in the nanoparticulate aluminosilicate feedstock, showed the greatest influence on the microstructure and the crystallization of nanosized ceramic phases in the sprayed coatings.

Feedstock with 58 vol.% solid loading exhibited the most suitable behaviour for ceramic injection molding and was chosen to perform the complete process.

Ceramic hydrogen separation membranes are promising devices to be integrated in industrial hydrogen-based technologies using fossil fuel as feedstock.

The characteristics and consequently the properties of ceramic coatings performed using plasma spraying means depend not only on the operating conditions but also on the powder feedstock.