Sentence examples for ceramic binders from inspiring English sources

Ceramic binders can be used as well.

The coating series were produced via two sequential processes: electrostatic spray coating of cubic boron nitride particles with size less than 2 μm for a conformal porous coating preform of designed thickness; and chemical vapor infiltration of ceramic binder phase(s) at a temperature of around 1000 °C for a dense and well adherent composite coating.

Several different types of sorbents were manufactured by granulation and coating with different ceramic sol binders and different prescriptions in a tumbling fluidized bed.

The favorable properties of the ceramic-rich blended binders can be explained by the partial hydraulic character of the ceramic.

The coating layer was formed on the surface of the PP separator and both ceramic particles and binder did not infiltrated into the separator along the thickness direction.

The addition of recycled ceramic aggregates increased binder, filler and air void contents, as well as the resistance to plastic deformation and the retained indirect tensile resistance after immersion.

The filament is a composite of thermoplastic polymer, ceramic powder and binder.

Cylindrical and arc-shaped Al2O3 ZrO2 (Y2O3) eutectic ceramic structures without any binders were directly fabricated by laser engineered net shaping from pure powders.

Flow charts of the binder and ceramic coatings fabrication are presented here.

The first was based on sol technology and the second based on oxide ceramic powder (+ thermoplastic binder) processing.

The main conclusion was that hot bituminous mixtures with a reasonable addition of recycled ceramic aggregates can satisfy binder course performance requirements for medium-low volume roads.