Sentence examples for centre lathe from inspiring English sources

The following occupations were designated as jobs with known exposure to soluble MWFs in large droplet form: press and machine tool setters, other centre lathe turners, machine tool operators, machine tool setter operators, press stamping and automatic machine operators, and toolmakers tool fitters markers out.

Some fancy-cut stones are girdled by mounting them off-centre in the lathe chuck.

On the silversmith's lathe, the centre of the body is milled out to tolerances of a fraction of a millimetre, the holes are drilled through each part for the screws and threads laid on with a miniature die and tap.

Broaching is often impossible without the specific broaching or keyway machines unless you have a system that can be used in conjunction with a modern machining centre or driven tooling lathe; these extra bits of equipment open up the possibility of producing keyways, splines and torx through one-hit machining.

Mount a lathe center in the tailstock.

Freehold land in Kent was usually subject to gavelkind, or partible inheritance; administratively, Kent was divided into lathes, apparently centred on royal vills.

This visualization shows products that are likely to be exported by countries that export Lathes (including turning centres) for removing metal.. Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal.

The specimens were under shape of rectangular plates, circular disks and cylinders with different fibre architectures and a milling machine, a lathe machine and a five-axis high-speed vertical machining centre, were used for the experimental tests.

The microscope was attached to a high-speed machining centre (20 thousand RPM/18.5 kW spindle) that was operated as a high-speed lathe to measure temperature distributions during orthogonal cutting of AISI 1045 steel at surface speeds of up to 605 m/min.

This needs to be as substantial as the rest of the lathe, as it has to provide firm support for between-centres work.

Lathes (including turning centres) for removing metal.