Sentence examples for cathode mA/cm2 from inspiring English sources

Pre-exponential coefficient for cathode (mA/cm2).

Air was supplied to the cathode (300 ml min−1) and H2 was supplied to the anode (80 ml min−1).

Air was supplied to the cathode (250 ml min−1), and H2 was supplied to the anode (60 ml min−1).

The limiting current density of the cell with ribbed cathode (690 m A/cm2) is much higher than that of the cell with ducted cathode (430 m A/cm2).

This cathode shows 1.2-fold higher interfacial Li ion diffusivity (1.8 × 10−12 cm2 s−1) than that of an rGO/S cathode (1.5 × 10−12 cm2 s−10−12

The ASR of the core/shell fibre structured BSCF-GDC cathode is noticeably lower than that of the conventional BSCF-GDC cathode: 0.552 Ω cm2 at 550 °C in the core/shell fibre-structured cathode and 1.115 Ω cm2 at the same temperature in the conventional cathode (Fig. 4b).

The short-term test was carried out at 550 °C at a current density of 1 A cm−2 and the following conditions: air was supplied to the cathode (250 ml min−1) and H2 was supplied to the anode (60 ml min−1).

Contrary to the common belief on the thin cathode (∼50 μm), thicker cathode layer (100 300 μm) is beneficial to the SOFC stack performance.

The single-cell tests were also conducted between 600 and 450 °C under the following conditions: air was supplied to the cathode (300 ml min−1) and H2 was supplied to the anode (80 ml min−1).

Figure 4: Performance of DHHPFC at various temperatures with NPGL30 (A) and Pt/C (B) as the catalysts for both anode and cathode, 4 M NaOH + 10 wt.% N2H4 as anolyte and 0.5 M H2SO4 + 20 wt.% H2O2 as catholyte.

What's more, when the devices with an Ag cathode PTB7-NBr exhibits a much better interfacial modification than PTB7-NSO3.