Sentence examples for casting temperature from inspiring English sources

The factors considered were stirring speed, stirring time, blade angle and casting temperature.

An increasing casting temperature would reduce critical size caused by more heat to dissipate.

In this work, the most suitable solution casting temperature was 100 °C.

The wavelength of the fluorescence peak was found to be dependent on the casting temperature, Tcast.

Moreover, it was found that the diameter of cylinders increases with the casting temperature.

All these show an obvious casting temperature dependence of the microphase separation phenomenon.

The results showed that air cooling and the cast roll temperature have a crucial role on the orientation and amount of lamellae formation of the cast films, which was also confirmed from scanning electron microscopy (SEM) images of the films.

Draw ratio and cast roll temperature are found to be the key processing parameters, which determine orientation of lamellar stack and thickness of lamellar as well as amorphous layers, respectively.

In cast iron, remarkable changes in microstructure result from various alloying additions and casting temperatures.

We found that higher casting temperatures cause partial crystallization, which enhance the plasticity as long as the volume fraction of the crystalline phase is low.

When comparing with the conventional No EMT casting condition, hydrogen porosity defect improving amplitudes of 33.8%, 57.9% and 51.2% at casting temperatures 670 °C, 700 °C and 730 °C were observed in A380 ingots casted by the experimental electromagnetic transport (EMT) prototype with plane induction electromagnetic pump (EMP).