Sentence examples for casting surface are from inspiring English sources
It is concluded that the mean diameter between paired micropores, and the mean distance to the casting surface, are predominant in fatigue crack initiation.
An experimental approach, based on thermal readings collected at six different positions from the casting surface, was used in order to quantitatively determine the solidification thermal variables: tip growth rate and cooling rate of Pb 0.3 wt%Sb, Pb 0.85 wt%Sb and Pb 1.9 wt%Sb alloys castings.
Specimens were rotated 90° along the longitudinal axis so that casting surface was on the back side during the flexure test and a notch of 25 mm depth was introduced at the mid-span using a circular saw as per the guidelines given in EN 14651 2005.
A criterion for predicting the onset of lateral growth based on the inclination of the solidification front at the casting surface is demonstrated.
The cast surface is composed of a large number of triangle elements.
The normal vector pointing to outside cast surface is considered as the reference direction for offsetting (Fig. 6a).
A subset of these polymers were synthesized and solvent cast surfaces were prepared in 96 well plates for the measurement of fibrinogen adsorption.
It should be noted that each beam is turned 90° from the casting surface, and the notch is then sawn through the width of the beam at mid-span.
Conoidal shell is an aesthetically appealing, stiff, easy to cast surface which is popular to cover large column free open spaces found in shopping malls, auditoriums and aircraft hangers.
For the region with predominant Cu inverse segregation, i.e., close to the casting surface, the Cu content is the driving-force leading to a decrease in the corrosion resistance, but the favorable effect of the fineness of the dendritic array has also to be taken into account.
Samples which are closer to the casting cooled surface are more affected by the solute inverse segregation, i.e. have a Cu content that is higher than the alloy nominal composition.
