Sentence examples for casting surface from inspiring English sources
The mold material must also resist fusion with the molten metal, and the sand at the mold surface must be closely packed to give a smooth casting surface.
The smooth casting surface leads to larger deformation at peak load under monotonic loading and at failure under fatigue loading than the corresponding values for beams with a rough casting surface.
Based on preliminary trials, glass, PEG 400 and sucralose were selected as casting surface, water-miscible plasticizer and sweetener for OTF, respectively.
Design of each feeder contains the following steps: determination of the feeder-neck connection point on the casting surface, initial feeder design, feeder shape optimization and feeder topology optimization.
An experimental approach, based on thermal readings collected at six different positions from the casting surface, was used in order to quantitatively determine the solidification thermal variables: tip growth rate and cooling rate of Pb 0.3 wt%Sb, Pb 0.85 wt%Sb and Pb 1.9 wt%Sb alloys castings.
Casting solidification is quickly simulated to view the progress of cooling from casting surface to interior, and to predict the location of shrinkage defects such as porosity and cracks.This helps in verifying and optimizing the design of feeders, which can be verified by advanced simulation.
Adhesive bonding of HPDC aluminum alloys with other structural parts has been ever challenging in the hybrid construction of automobiles due to the inherent contamination of casting surfaces by die lubricants.
Conoidal shell is an aesthetically appealing, stiff, easy to cast surface which is popular to cover large column free open spaces found in shopping malls, auditoriums and aircraft hangers.
Builds cast surface pattern.
Geometric varieties of cast surface make it difficult to simply create the path via extracting intersection line between a flat plane and cast surface.
Once a tube is built, the opening gap is developed by performing Boolean subtraction between the tube and cast surface as displayed in Fig. 5.
