Sentence examples for casting specimens from inspiring English sources
The study included casting specimens, cubes and cylinders, from three different SCC mixture proportions.
After 24 h of casting, specimens were demoulded and cured under wet gunny bags for 28 days (Figs. 3, 4, 5).
The oxide films and casting defects existing on the fracture surface of the casting specimens were observed by scanning electron microscopy (SEM).
After casting, specimens were subjected to different curing temperature (20, 40, and 60 °C) and moisture conditions (continuous and partially moist).
The mould-cast specimens process flexural strength of 7.87 MPa.
The flexural properties of both printed and casted specimens were tested according to ASTM C348-14 (ASTM 2014).
However, there still exist certain mechanical mismatch between the printed with mould-cast specimens.
The surface roughnesses of FL0 and FL45 were considerably higher than those of the cast specimens, whereas there were no significant differences between FL90 and the cast specimens.
However, gating design proved to affect the microstructure and tensile properties of cast specimens.
The fabricated cast specimens are characterized with Optical and Scanning Electron Microscopes.
The mechanical properties such as tensile strength, percentage elongation, and hardness are studied for all stir-cast specimens.
