Sentence examples for cast specimens from inspiring English sources

The surface roughnesses of FL0 and FL45 were considerably higher than those of the cast specimens, whereas there were no significant differences between FL90 and the cast specimens.

The fabricated cast specimens are characterized with Optical and Scanning Electron Microscopes.

However, gating design proved to affect the microstructure and tensile properties of cast specimens.

The influence of process parameters and wall thickness on the microstructure and tensile properties of cast specimens was studied.

The comparisons of cast specimens to pavement cores were based on infiltration rate, density, and porosity.

This has been tested on laboratory cast specimens with 50 and 30% cement replacement with GGBS and FA respectively.

Table 2 Cast specimen's specifications.

Open air cavity structure was used for air blowing during the solidification process to increase the cooling rate of one thin rod of the cast specimen, and its secondary dendrite arm spacing was narrowed.

The camera and cast specimen were placed in a standardized position using a scale, with the cast specimen fixed with an adjustable clamp and ring stand at a set distance from the camera.

The mould-cast specimens process flexural strength of 7.87 MPa.

However, there still exist certain mechanical mismatch between the printed with mould-cast specimens.