Sentence examples for cast solution from inspiring English sources
Beyond a critical solvent concentration, initially isotropic cast solution rapidly develops optical anisotropy as detected by out of plane birefringence measurement while it remains isotropic in plane.
Such parameters which the former relates to thermodynamic effect and the latter controls the time of separation of the cast solution film immersing in the non-solvent bath from the glass plate were calculated as dimensionless parameters for further analysis.
In addition, it was found that carbon dioxide gas produced by the reaction of glacial acetic acid in the cast solution with sodium carbonate in a coagulation bath can be used to control the even distribution of the membrane pore size during the process of coagulation.
Poly methyl methacrylate), PMMA based gel polymer electrolytes (GPE) containing immobilized lithium bis(oxalato borate, C4BO8Li or LiBOB dissolved in a propylene carbonate ethylene carbonate binary solvent were prepared by heating the cast solution between 70 and 80 °C for 20 min.
Homogeneous PCL samples were successfully prepared by optimizing the processing parameters, such as the polymer concentration and the volume of the cast solution.
Whereas the mythology of Western management tends to cast solutions as fixed and final, Eastern philosophical tradition emphasizes individual accommodation to a continuously unfolding set of events.
Multiple overlapping physical and chemical changes often take place during casting/drying and imidization from PMDA-ODA polyamic acid precursors from cast solutions.
The microstructures of the alloy in the as-cast, solution treated and then aged states were characterized.
Based on the thermodynamic description obtained in this work, the microstructures and phase transformations previously observed in the as-cast, solution heat treated and aged conditions are discussed.
In order to verify the simulation results, microstructural investigations in as-cast, solution treated and aged conditions were carried out using electron probe microanalysis (EPMA), scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM).
Specifically, membrane casting solution viscosity, cast membrane thickness, pure water flux, and internal morphology were evaluated.
