Sentence examples for cast composite from inspiring English sources

The study reveals that the solid particle erosive weight loss of the chill cast composite materials decreases with the increase in the standoff distance for a given impingement angle and testing period.

Dispersions of nanotubes stabilized by block copolymers in selective solvents can be used to cast composite films in which the nanotubes are segregated in microdomains of the structured polymer.

In this research, microstructures and hardness profiles across the interface of friction stir welded joints between monolithic 2024-T4 alloynum AAloy (and Al/Mg2Sig2Si metal matrix cast composite (MMC) and effects of one and two welding passes on these parameters were investigated.

The aim of this study was to explain the influence of the plastic deformation generated in friction stir processing on the changing concentration and distribution of SiC reinforcement particles in the cast composite A339/SiC/p, as well as determine its mechanical properties.

The new composites also have improved wear resistance when compared to gravity cast composites.

The squeeze cast composites show a peak strength of 216 MPa showing an increase of 11.6% in tensile strength.

Squeeze cast composites were prepared by infiltrating these preforms with alloy ZA8.

According to the technological conception, an assumption was made, that the cast composites would be produced in technological procedure shown in Fig. 1.

The erosion wear behavior of the developed chill cast composites was evaluated at room temperature using air jet erosion test rig according to ASTM G76 standards.

It is found that the solution cast composites are porous and a hot-press process can eliminate the porosity, which results in a dense composite film.

Squeeze cast composites with 6 wt.% of beryl particles showed almost 1.2 times reduced adhesive wear rate at 2400 m sliding distance when compared to that at 600 m.