In the case of melt-spun samples, nanometer-sized Al2Si2Eu phases were observed.
Raman spectrometry was utilized to estimate degraded drug percentage, residual drug crystallinity and glass-transition temperature in the case of melt-extruded pharmaceutical products.
In the case of melt-filled polymers, the viscous forces are obviously the dominant ones and the nanofillers are submitted to strong orientation under flow.
We review a case of "melting" septal cartilage after septal extension graft placement in a nasopharyngeal cancer patient who had received radiotherapy prior to the graft placement.
Second, to the best of authors knowledge, there are very limited number of engineering experimental results available for the case of melting with Internal Heat Generation (IHG).
Heat transfer directly governs the ablation velocity of concrete in case of molten core concrete interaction (MCCI) and, consequently, the time delay when the reactor cavity may fail.
However, only weak coherency strain energy is the effective driving force for LFM in the case of melting of one-phase alloys.
In the case of melts, such measurements may also be used for real time assessment of polymer state and for process control.
Maximum temperature of the core catcher plate evaluated for different core meltdown scenarios using these models showed that there is much higher heat removal potential for single tray in-vessel SFR core catcher compared to the design basis case of melting of 7 subassemblies under total instantaneous blockage of a subassembly.
In case of complete melting of smaller lamellae, melt-recrystallization is retarded but still distinctly faster than cold- and melt-crystallization, due to incomplete isotropization of the melt.
The remainder, in the case of Organic Melt, is sodium chloride.
