Sentence examples for carbon laminate from inspiring English sources

Specimens were manufactured following the hand lay-up process in an intra-ply configuration with varying degrees of glass fibres added to the surface of a carbon laminate.

Moreover, it was found that the load path method provided surplus reinforcement against net section failure and it was possible to more than double the efficiency of carbon laminate joints by reducing the ratio of joint width to bolthole diameter w/d from the standard value of 5 to a more compact 2.5, while simultaneously maintaining the bearing strength of the laminate.

Both steel strip and carbon laminate were represented by 4-noded shell elements.

Figure 4 Six inch I-beam with carbon laminate applied to the web.

Eighteen layers were deployed, resulting in 9.2 mm of structural carbon laminate and a 0.6 mm thick adhesive layer.

The elastic properties of the carbon laminate were, knowing that directions 1/2 correspond to 0°/90°: E1 = E2 = 46GPa, ν12 = 0.05 and G12 = 3 GPa.

Basalt fibers have higher thermal resistance, corrosion resistance, and ductility than the commonly used carbon (C) laminates.

The purpose of this paper is to investigate how the damping properties of structures made of carbon laminates can be increased when flax and viscoelastic layers are interleaved into the carbon laminates.

Electrostatic spray deposition (ESD) of aesthetic and protective low curable transparent powder coatings onto carbon fibre-reinforced epoxy composites (i.e., carbon laminates) is the matter of the present investigation.

Based on the generalized Schapery theory, a progressive damage model is developed to describe the nonlinear behavior of plain weave carbon laminates during impact.

Test results highlighted the high potential of the innovative composite systems for flexural strengthening applications and similar effectiveness compared with the pultruded carbon laminates.