Sentence examples for capabilities of the samples from inspiring English sources
Overlap number and line spacing were varied in this experiment, and the changes in the absorption capabilities of the samples were experimentally measured and compared.
The nature of reaction intermediates and the capability of the samples to adsorb them have been studied by FTIR spectroscopy combined with the adsorption of propene.
The moisture absorption capability of the samples was evaluated by placing the dried sample in the desiccators in which the relative humidity was controlled by salt solution.
The gas separation capabilities of all the samples were examined using a developed dynamic CO2/N2 breakthrough setup, as shown in Fig. 2.
A strong photocatalytic reduction capability of the sample was demonstrated by its superior photocatalytic reduction activity on aqueous nitrate under a simulated solar illumination.
The intensity of the LE-μ+ source at PSI and the capability of the sample environment have been steadily evolving over the past years and the flux at the sample has now reached intensities of more than 700 μ+/s.
It was found that the rate capability of LiFePO4 is mainly controlled by its specific surface area and it is an effective way to improve the rate capability of the sample by increasing its specific surface area.
The capability of the sample to chelate the ferrous iron was calculated using the following equation: The FTC method was adapted from the method of Osawa and Namiki ([1981]).
When the current density is changed back to 100 mA g− 1, the capacity of MoS2/C-700 sample can recover up to ~ 500 mAh g− 1 after 50 cycles at different current densities, revealing the good rate capability of the sample.
It was decided to use the 15 minute period so as not to reach a point where the maximum amount of decomposition occurs regardless of the hydroxyl radical producing capability of the sample.
Interestingly, 22 out of 23 PAHs and OPAHs detected in the 40 h deployment were also detected in the 8 h deployment, further illustrating the capability of the sampler for typical 8 or 10 h time-weighted averages.
