Sentence examples for cap beams from inspiring English sources

The bridge system under consideration consists of hollow circular steel piles welded to steel cap beams.

A specific design issue that is concerned with the structural response of bent cap beams in as-built and retrofitted box-girder bridges under gravity and seismic loads is tackled in this paper.

Results show that elevating bridges with the studied steel pedestals decreases longitudinal and transverse deck displacements, longitudinal shear and moment in columns, cap beam moment and pounding force.

NEWARK — From the moment he pulled on a blue cap, beamed and proclaimed a Knicks rebirth last July, Amar'e Stoudemire has been a constant, an immovable force and a reliable presence.

After putting on his Cavaliers cap, beaming for the cameras and answering countless questions about whether he could replace LeBron James in the hearts of Cavs fans, Irving expounded on his wardrobe choice in the de facto green room, a curtained-off area where he was joined by his father and sister, dressed in their Sunday best.

Table 1 summarizes the properties of superstructure, bent cap beam, and bent columns for these bridges.

The interior bent cap beam and the end diaphragms were modeled using 3D frame elements with large moment of inertia.

The cap beam is a rectangular element of 1.9 m by 2.0 m and the circular columns have a diameter of 1.4 m.

When the embankment height to the cap beam clear spacing ratio, h/s, is less than 1.4, apparent differential settlements may occur on the surface of embankment.

The retrofitted reinforced concrete bent specimen consisted of two circular cross section columns, a rectangular cap beam and a buckling restrained brace in a diagonal configuration.

Past research has shown that directly welding hollow circular steel pipes to a steel cap beam, regardless of weld configuration, does not mitigate the undesirable failure mode of brittle cracking in the welded region.