Sentence examples for calculations for the diffusion from inspiring English sources

First-principle calculations for the diffusion of 3d transition metal (TM) solutes in nickel demonstrate the existence of a higher diffusion energy barrier for solutes with smaller atomic sizes.

For Ca2+ at specific shells from the protein, the MSD statistics used for calculation of the diffusion constant was such that it contained at least 8 different simulations which contributed to the MSD average and the MSD graph was near linear.

An average diffusion time (τD) from each experiment run was used for calculation of the diffusion coefficient (D, D = ω0/4τD), where ω0 is the waist radius of a laser beam obtained from instrument calibration (0.337 μm used).

The polymer specific parameters A´P and τ were taken from the guide (LDPE: A´P = 11.5, τ = 0; PS: A´P = –1, τ = 0) and inserted manually for calculation of the diffusion coefficients.

A numerical method is presented for the calculation of the diffusion of high energy electrons in a heterogeneous medium.

The diffusion flux model in which the accelerations due to various forces are taken into account for the calculation of the diffusion velocity of the particles enables its application to the analysis of multi-dimensional gas-particle two-phase flow.

Because of this, CPSV was believed to be a more reliable method than LSV for the calculation of the diffusion coefficient of the Pb II) ion.

With this definition and Eq. (5) for the general calculation of the diffusion coefficient (Stokes Einstein equation), the diffusion coefficient for the release agent transfer can defined by the following equations (Eq. 15 resp. Eq. 16) D_{rat} = D_{SE} cdot D_{p} (15) D_{rat} = frac{{k_{b} cdot T t)}}{f cdot eta } cdot frac{p(t)}{T t) cdot v(t)} (16).

Calculation of the diffusion half-times for fluorescein resulted in 4 minutes for the first, and 2.4 hours for the second phase.

The resulting deformed areas of the capillary cross-sections are determined and used in the calculation of boundary conditions for the diffusion model.

For the multicomponent diffusion calculations, the diffusion coefficients in water (D w ) at 25 °C for the main primary dissolved species were taken into account.