Sentence examples for calculation of effective from inspiring English sources

Clinically, there are three methods to estimate delivered VT: first, direct measurement at the expiratory limb of the ventilator; second, direct measurement at the ETT with a pneumotachometer; and third, indirect calculation of effective VT by using set VT minus calculated compressible volume lost in the ventilator circuit [ 5].

This number was used for calculation of effective current density of galvanostatic deposition.

The calculation of effective atomic charges plays a dominant role in the application of quantum mechanical calculations to molecular systems.

Figure 6 represents the calculation of effective oxygen diffusivity of concrete which means diffusivity with effective pore due to moisture.

Hence, some authors may have chosen to avoid the calculation of effective doses in favour of reporting measurable variables as the dose-length product orCT dose index.

In [9], calculation of effective wind speed is achieved by the particle filter, and FLC is used to control the WT at below rated wind speed.

These calculations of effective cross sections may be useful for those designing NRF experiments or systems that detect specific isotopes in well-shielded environments through observation of resonance fluorescence.

It appears that ENV 1993-1-3 gives slightly better agreement with test results, but ENV 1993-1-2 is easier to implement because it does not require additional calculations of effective areas of thin-walled cross-sections at non-uniform elevated temperatures.

In order to verify the accuracy of thorium cross section library, calculations of effective multiplication factor, control rod worth, reactivity worth of Th plates for the same core configurations were done by MVP code (Nagaya et al., 2005) using JENDL-4.0 library (Shibata et al., 2011).

Due to the published experimental data a minimum distance between filaments of 1000  μm for polypropylene and of 600  µm for PVDF meshes is set for the calculation of the effective pore areas and the effective porosity [ 3].

The influencing factors are analyzed according to the calculation result of effective pile length.