Sentence examples for calculated to around from inspiring English sources

The low incidence rate also limits the minimum size of time strata for which sensibly precise estimates of protective efficacy can be calculated to around one month.

Whereas experimental density was found to be around 1.02 kg/m3, the theoretical density was calculated to be around 1.06 kg/m3.

The annual rate of dune migration is calculated to be around 4.1 m/a.

The thickness of the splat was calculated to be around 3 μm and the deposition efficiency was approximately 70%.

A thirty-foot-high wall, in precast, post-tensioned concrete panels of the kind Trump specified, has been calculated to require around three times the amount of concrete in the Hoover Dam, plus some five billion pounds of steel reinforcement.

Interlayer binding energies for a large number of layered compounds, including MoS2, were calculated to be around 20 meV Å−2 (~0.32 N m−1), with the specific surface energy being half of that value (~0.16 N m−1)34.

The life cycle cost of the system was found to be [TRY] 54,560 whereas the annualized life cycle cost and unit price of electricity was calculated to be around [TRY] 2700 and [TRY] 0.43 for each kilowatt-hour.

These effects have been calculated to be around 2 3% in a single radial pass in the most pessimistic edge conditions (that is, considering the case of lowest temperature in the standard regime: pulse 32164 in Figure 3, wherein the neutral density is less than 1017 m−3).

The interfacial frictional shear strength inferred from the longitudinal strain profile of the broken fibre was calculated to be around 200 MPa, whereas a conventional post mortem full fragmentation analysis based on the mean fragment length would have incorrectly given a value of ∼700 MPa.

Cryo-milling results in nearly random mixing of copper and silver, whereas the mixing achieved by milling at 315 K is calculated to be around 70%. 453 K milling results in the decomposition into copper-rich and silver-rich regions at a scale of ≈25 nm.

The Well-to-Tank energy efficiency can be thus calculated to be around 37% (40%*92.5%).