Sentence examples for calculated oil from inspiring English sources

We also estimated the saturation of water during the different displacement schemes and calculated oil recovery from both water-EOR and CO2-EOR.

The second scenario (scenario 2) on the other hand calculated oil volume using average petrophysical parameters such as porosity, NTG and Sw derived from well logs, also using the initial oil formation volume factor (Samimi and Karimi 2014).

Average signal intensity and fold-change for each probe were then calculated (oil UE versus DES UE and oil UM versus DES UM).

To determine the relationship between these variables and the final calculated oil yields per plant, Pearson correlation coefficients were calculated (Table  2).

Figure 2 plots the measured outlet temperature and calculated oil recovery of each sandpack versus the injected porous volume (PV).

Calculated oil saturations for each pair of tracers are listed in Table 8.

By that measure, Mr Lasserre calculates, oil is overvalued by 50%, and zinc and copper by almost 40%.

The oil and water production rate was monitored to calculate oil recovery and periodic water cut.

Steady-state pressure drop was measured to calculate oil effective permeability.

Ji et al. (2008) divided the injection production control area by the angular bisector of two neighboring injector producer lines to calculate oil production for 4-spot, 5-spot and invert 9-spot areal well patterns.

However, they usually use two-phase water and gas relative permeability functions (krg) and one of the known correlations (e.g., Stone, Baker) to calculate oil relative permeability in a three-phase displacement.