Sentence examples for calculated limit from inspiring English sources

The BiFE revealed good linear operation in the examined concentration range of 10 90 μg L−1 Ag(I) with r2 of 0.998, calculated limit of detection (3σ) of 2.1 μg L−1 obtained after 60 s accumulation, and favorable repeatability with RSD of 3.6% (50 μg L−1, n = 10).

Next, for every base a new value was calculated (limit – perror).

Calculated limit states by FEM software Plaxis on two examples of designed structures composed from micropiles, and reinforced soil structures by geogrids will be presented in this article.

The calculated limit of detection for the direct plating was 3.7 log CFU/carcass, compared with 0.7 log CFU/carcass for the enrichment culture.

The calculated limit detection is 4.7 × 10−7 M.

The calculated limit of detection was 3.0 ppm.

The calculated limiting current density increased by about 30% when the boundary condition was changed from isothermal to adiabatic.

However, the calculated limiting current density in 0.5 M AgNO3 −025 M HNO3 solution was in good agreement with results from the polarization curve.

It is also possible to use the proposed approach to draw the Pareto curve for any designed HEN between the calculated limits, and thus to quantify the trade-offs between economic and environmental objectives.

Regarding the simulation-based simplification operations, the original bounds can be replaced by the calculated limits.

The calculated limiting rate of the reaction catalysed by the pyruvate decarboxylases, EC 4.1.1.1, was also below the physiological flux.