Briefly, tissue cylinders of 2.0 mm diameter were punched from selected areas of each "donor" block by utilizing a thin-wall stainless tube from a precision instrument (TMA-100, Chemicon, USA) and were transferred by a solid stainless stylet into defined array coordinates in a 45 * 20 mm new recipient paraffin block.
In the present work, field experiments on unconfined explosions of silane-air mixture were performed by utilizing a cubic frame covered with a thin vinyl film for release confinement and a sufficiently high release velocity of silane from a tube to prevent ignition.
The electrical resistivity of the as-deposited and thermally processed Pt thin films was measured by utilizing a van der Pauw's four-point probe technique.
In contrast to the pure Al masteralloy, which led to the formation of Fe2Al5 coatings at 650 °C, a coating consisting of a thin Fe2Al5 outer layer and an FeAl inner layer was formed at 700 °C by utilizing a Cr 25Al masteralloy.
The oxygen-terminated α-Al2O3(0 0 0 1) surfaces were generated by utilizing an oxygen plasma at different temperatures in ultrahigh vacuum, and then Cu thin films were grown by molecular beam epitaxy on these surfaces.
Frey et al. utilized a thin film of chemically exfoliated MoS2 sheets as the anode for polymer LEDs (PLEDs) [29].
This paper studies the lithofacies, sedimentary facies, depositional models and reservoir architecture of the rudist-bearing Sar-3 zone of Cretaceous Sarvak in the Southwest of Iran by utilizing coring, thin section, XRD data of five coring wells and 3D seismic data.
104– 108 By utilizing shear thinning colloidal solutions, the ink can flow easily during the high pressure extrusion writing process and then rapidly solidify after writing.
Reducing the geometric dimensionality in a photovoltaic cell is useful in designing optimal contact geometry, in enhancing the conversion efficiency by enlarging the concentrations of photogenerated carriers and, generally, by utilizing thin-film structures for solar cells.
The thinned trees can either be utilized (a commercial thinning) or left at the site (a pre-commercial thinning).
