Sentence examples for by using the solid from inspiring English sources

After that, the topology structures of wing leading edge of different glass fiber ply-orientations were obtained by using the solid isotropic material with penalization (SIMP) model and sensitivity filtering technique.

This comparison shows that the discrepancy between the results obtained by using the solid and tetrahedral elements in beam problems is more significant in the dynamic analysis as compared to the discrepancy of 10% reported in the literature for the static analysis.

However, we will find below that by using the solid angle provided by our 4 π-PM the measured effective excitation point spread function (PSF) is worse when using the full mirror as compared to focusing from only half solid angle.

The existence of Fyield thus provides a possible mechanism for solidification and generation of thrust forces on sand without slipping, by using the solid properties of the media.

To do this, for each pathway k, we first determined the number of statistically independent SNPs jk by using the Solid Spine algorithm in Haploview [ Barrett et al., 2005] to assign SNPs to haplotype blocks in the pathway dosage matrix.

The high transparent heterojunction photodetector of the configuration of NiO/ZnO/ITO/PET was realized by using the solid-state sputtering method.

Here, we design and prepare a kind of Bi3+ doped Lu2CaGeO6 phosphor by using the solid-state reaction at 1250 °C in air for 5 h.

The titanium silicide intermetallics have been directly prepared from the mixture of titanium oxide (TiO2) and silicon oxide (SiO2) powder by using the solid-oxygen-ion-conducting membrane (SOM) electrolysis process.

The sample was grown on semi-insulating GaAs (001) substrates by using the solid-source molecular beam epitaxy (MBE).

On the contrary, cyclic four-point-bending tests at a stress ratio of R = 0.1 reveal a decrease in fatigue strength by 43% in case of the metal-cored and by 46% using the solid wire in relation to the base material fatigue resistance.

The CLC process has comparatively more scope of efficiency improvement in future by directly using the solid coal fuel into the fuel reactor, eliminating a separate gasification and ASU, which are responsible for high exergy losses in the system.