Sentence examples for by using an acceleration from inspiring English sources

It is interesting to note that the above series follows from (5) by using an acceleration technique known in the literature as Euler's transform.

Table 3 shows the variation of Zn and S chemical compositions in ZnS films under different substrate temperatures analyzed by EDAX, using an acceleration voltage of 15 kV.

Hence, this research focuses on accuracy of IMU-based tracking system by using an improving acceleration estimation method.

The smart dice periodically sample their acceleration sensors using an acceleration service to detect whether they are moved by a variance and threshold service.

These velocity waveforms were derived by integrating the accelerograms, shown in Fig. 2, by using a linear acceleration method in the time domain Fig. 4 Fourier amplitude spectra and spectral ratios.

Spectra were collected at 295 K, 77 K and 5 K by using a constant acceleration drive system (WissEL) in transmission mode with a 57Co/Rh source and calibrated against a 7 μm thick α-57Fe foil measured at room temperature.

The samples were analyzed in a negative ion mode by using a total acceleration voltage of 20 kV with an 18.25-kV 18.25-kVon voltagextractionttenuation of 55 and delayed extraction of long time delay.

Through the foregoing discussion of simulations and analysis, it can be concluded that it is possible to monitor short-wavelength rail defects such as dipped rail joints, dipped welds and squats by using a locomotive-mounted acceleration system.

Two electrodes are placed above the ulnar nerve and the response to the nerve stimulation is measured by using a small piezoelectrode acceleration transducer distally placed on the volar side of the thumb.

In contrast, the current study had higher lateral than vertical acceleration by using a reciprocating plate that oscillated on a central axis so that, when half of the platform is up the other half is down, causing a continuous balance of hips.

Microscale pad structures of three different heights manufactured by the Sandia SUMMiT™ IV process were tested at extreme accelerations generated by using a pulsed laser-loading set-up.