Sentence examples for by using an accelerated from inspiring English sources

Designing normal pressures for geonet drainage materials were evaluated by using an accelerated compressive creep test method as SIM (stepped isothermal method).

The process of carbonation was accelerated by using an accelerated carbonation chamber and the carbonation resistance of concrete were examined by measuring the carbonation depth of concrete specimens.

The system operates in real-time (i.e. volumes are registered as fast or faster than they are acquired) by using an accelerated framework on a graphics processing unit.

Hence, a comprehensive study has been designed to infer the corrosion characteristics of concrete mixes made with brick aggregate in saline environment by using an accelerated corrosion technique.

We investigate whether these factors can be optimised following transradial cardiac catheterisation by using an accelerated band removal protocol facilitated by a haemostasis promoting pad, in combination with a patent haemostasis technique.

Motor ability, coordination and learning were evaluated by using an Accelerated Rotarod apparatus for mice (Cat. # 7650 by Jones and Roberts, distr. by Basile Instr., Italy).

Sample gas is compared with a standard reference gas at similar conditions at low gas pressures, by adding the repeller electrode to the source and by using an accelerating voltage as high as possible.

EDS with standardless calibration was used to determine the composition of deposited CIGS film by using an accelerating voltage of 15 kV and a dead time of approximately 20%.

Mass spectra were acquired in the linear positive-ion mode by using an accelerating voltage of 25,000 V, a grid voltage of 90%, and an extraction delay time of 300 ns.

We performed the rotarod test using an accelerating rotarod by placing a rat on a rotating drum (3 cm diameter) and measuring the time for which each animal was able to maintain its balance on the rod as latency time to fall (seconds).

The reliability of the MIM capacitor and power divider is investigated by using a highly accelerated stress test, which results indicate that both the component and device fabricated by the optimized process have a stable and reliable performance.