Sentence examples for by using a calibrated from inspiring English sources

The torque is detected capacitively; the measured capacitance is converted into torque by using a calibrated feedback coil.

To measure corneal thickness by using a calibrated confocal microscope and to compare this measurement to thickness determined by ultrasonic and noncontact scanning slit pachymetry.

The external quantum yield (QY) of PL was measured by using a calibrated detector as it was described in [39].

SV was estimated directly by using a calibrated pipette (vol. = 25 ml, Diffco Din, Witeg, Germany) to fill the shell with distilled deionized water.

The Dose Area Product (DAP) was measured at each examination by using a calibrated Gammex DAP-841S transmission chamber installed on the diaphragm of the X-ray equipment.

The internal quantum efficiency (IQE) measurements were carried out by using a calibrated Newport 818-UV sensor and a monochromator (Acton Spectra Pro 2300i) with a lock-in amplifier (SR-830) and a SR540 optical chopper.

After the coated CFC wall to ITER-Like Wall (Beryllium/Tungsten/Carbon) transition in 2010 11, confirmation of the neutron yield calibration will be ensured by direct measurements using a calibrated 252Cf neutron source deployed by the in-vessel remote handling boom and Mascot manipulator inside the JET vacuum vessel.

Implant stability was measured by insertion torque using a calibrated torque wrench3 at the time of implant placement and by ISQ measurements using the Osstell™4 unit at the time of implant placement and at 6 weeks and 6 and 12 months (Fig. 2).

The developed gas mixing system is validated by analyzing five quaternary and four ternary gas mixture compositions containing different fractions of Ar, CO2, CO, CH4, N2, and H2 predicted and generated by the system, using a calibrated gas chromatograph.

Systolic blood pressure (SBP) and diastolic blood pressure (DBP) were measured twice by a physician using a calibrated sphygmomanometer with an appropriately sized blood pressure cuff in the right arm in the sitting position after a 10-min rest.

The output power is estimated to be 1 mW at a driving current of 50 mA by on-wafer measurements using a calibrated photodiode.