Sentence examples for by tuning the content from inspiring English sources
The lamellar structure, crystallization behavior and mechanical properties of PBST nanocomposites can be regulated by tuning the content of nanoparticles.
The diameter and wall thickness of the silica nanotubes can be controlled by tuning the content of TEOS in the initial spinning solutions.
The above results suggest an interesting approach for controlling the morphology and properties of 3D carbon matrix by tuning the content of penetrated NaCl particles used for organo-inorganic co-assembly.
The self-discharge time of a single cell assembled with AIEM of optimized chemical structure is over 3 times longer than that with Nafion117, and a desirable conductivity/permeability trade-off can be achieved by tuning the content of benzimidazole moiety.
By tuning the content of Ni2P, H2 generation rates of 43.3 μM h− 1 (1 mg photocatalyst) and 700 μM h− 1 (100 mg photocatalyst) and a solar to hydrogen efficiency of 1.5% were achieved for the Ni2P-Cd0.5Zn0.5S composites.
Pure BiOI and CQD-modified BiOI samples with different mass ratios (0.5, 1, 1.5, and 2 wt.%) were synthesized using a similar route by tuning the content of CQDs.
By tuning the contents of red core and green-emission segment, the optimized triple-color hyperbranched polymer is acquired, named PF-BT250-Ir(piq 325.
A high yield of 0.97 gG/SWCNTs/gcat can be achieved by tuning the Fe content in the FeMgAl LDHs after a 15-min growth.
The three-dimensional network of the hydrogels was tailored by tuning the ionic content through methacrylic acid as template-binding comonomer while keeping the ratio between crosslinker (N,N′-methylenebisacrylamide) and N-isopropylacrylamide fixed.
A maximum specific capacity of 330 mAh g−1 can be achieved after 50 galvanostatic charge-discharge cycles at a current density of 100 mA g−1 by tuning the RGO content in the composites.
By tuning the Fe content, the magnetostructural transition from paramagnetic parent phase (i.e. austenite) with a Ni2In-type hexagonal structure to ferromagnetic TiNiSi-type martensite can be realized in a temperature window determined by the Curie temperature of the austenite and that of the martensite.
