Your English writing platform
Discover LudwigSuggestions(5)
Exact(5)
Toughness was evaluated by the indentation method using Laugier's equation, after experimentally assessing its applicability.
The thermal- and stress-induced depolarisation effects due to domain switching have been assessed by the indentation method on bulk PZTs.
The residual stresses in the surface layer of the graded ceramic tool materials were calculated by the indentation method.
We know that the absolute fracture toughness values obtained by the indentation method could be overestimated, but this technique has been approved by many authors to provide the estimation of the fracture toughness values for samples with high-density levels, where the porosity cannot have effect on crack propagation [11, 24 28].
In order to understand the difference between PC and glass the fracture toughness of TaFD5 was measured by the indentation method and the lowest fracture toughness was found in decanol, next in water and the highest in air based on the lengths of indentation cracks.
Similar(55)
Fracture toughness of sintered and annealed materials has been determined by the Vickers indentation method and varied in the range 3.6 5.9 MPa m1/2.
Near surface modifications in the hardness were investigated by employing the Vickers indentation method.
The fracture toughness of the coatings measured by indentation method are found (5.65 6.97 muchm1/2), muchigherer than that of individual TiB2 or TiC.
The hardness of the films was measured by an indentation method.
Moreover, nanoindentation-induced micro-cracks oriented along well-defined crystallographic planes can also be observed, consistent with the low fracture toughness of AlON evaluated by an indentation method using Laugier's equation.
The same structures are fabricated experimentally by a hot process, and the mechanical behaviors regarding the load displacement are evaluated using the Hertzian indentation method.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com