Sentence examples for by the drop casting from inspiring English sources

Figure 5a shows a typical EDX spectrum of the sample with the higher amount of palladium and an inserted table with the quantification for the hybrids prepared with the chloride precursor by the drop casting technique.

TiO2 layers were coated onto the p-Si surface by the drop casting of titanium isopropoxide (8×12.6 μL, 2.5 m m in toluene).

The PEDOT PSS liquid dispersion consists of more than 95%% water that is easily absorbed by the drop cast NFC-G layer as seen in the contact angle measurement results in Fig. 7.

A simple and effective electrochemical sensor was designed by the drop cast method for the detection of Diclofenac Sodium (DS), a widely used painkiller, by combining the significant catalytic property of multi-walled carbon nanotubes (MWCNTs), excellent adsorption capacity and film forming ability of Chitosan and synergistic catalytic effect of Chitosan-copper complex.

The PEDOT film was polymerised by cyclic voltammetry on top of the drop casted C60 fullerene film.

Figure 2 shows the low-magnification SEM image of a close-packed monolayer array of PS spheres on Si substrate, formed by the drop-casting method.

A close-packed monolayer array of polystyrene (PS) spheres with mean diameter of 202 nm was formed on the substrate by the drop-casting method[17].

The ZnO aggregates composed of ZnO nanoparticles (NPs) and room-temperature (RT) grown nanostructures are chemically assembled on the ITO-PET substrate by the RT chemical treatment of the drop-cast ZnO NP layer on the substrate.

The samples were prepared by drop-casting 10 μL of a 0.001 wt % CNC suspension onto a freshly cleaved mica surface with an approximate area of 2 cm, and air-dried for approximately 30 min. Prior to the drop casting, the CNC suspensions were ultrasonicated for 5 min to reduce the number of aggregates.

The TEM specimens were prepared by drop casting the sample on the surface of the carbon coated copper grid.

The working electrode was prepared by drop casting the catalyst ink on the glassy carbon electrode such the platinum loading is 60 µg/cm2.