Considering four different climate zones in China, the annual composition of energy consumption of fresh air for per unitary flow rate is evaluated by employing the testing data of climatic parameters in the eight selected cities.
By comparing test data of different mixing ratios with the result solved by each recommended experiential formula, Li et al. (2011) have concluded that the formula (1) agrees well with the experimental results, and the formula (1) can be used to calculate heavy component oil's blending capacity.
The model results were validated by the test data of a commercial HAI848F type AAV.
Finally, the M-MC criterion is validated by multiaxial test data of eight kinds of rock mass.
Applicability of the present modeling is checked by describing the test data of G20CrNi2Mo bearing steel.
In the case of medium and high volume fractions of solid, the distribution of strain rate is calculated by using compression test data of semi-solid materials (SSMs).
Therefore, this study, which is first of its kind in the study area, aims at determining the aquifer parameters by analyzing pumping tests' data of large-diameter wells and estimating recharge distribution using GIS.
By analyzing experimental test data of V-pattern working, human driving characteristics have been derived and applied in the driver model by using linear quadratic regulator (LQR) and model predictive control (MPC).
In this paper, the failure modes of a 60 V power UMOSFET firstly have been discussed by analyzing the test data of the die, and our hypothesis is that the merger of the P-base regions under the trench leads to larger on-resistance and threshold voltage of 60 V UMOSFET.
In order to find the optimal number of overlapped peaks, a trial-and-error approach was used in this study by testing the data number on each side of data point xrc as 3, 5, 7, 9, and 11.
