Sentence examples for by specific surface area from inspiring English sources
It is confirmed by specific surface area data.
The resulting monoliths are characterized by specific surface area exceeding 300 m2/g, pore volume 0.3 cm3/g, and high mechanical strength.
The surfactants binding was also confirmed by specific surface area, total pore volume, average pore diameter and zeta potential value of the adsorbent RHB, S-RHB, and C-RHB as shown in Table 1.
Fig. 6 a Total C sorbed (normalized by specific surface area) onto hydrous Mn oxide (HMO) and goethite as a function of initial C to metal molar ratio in the batch system.
The composition of support and surface species (NiMo) of catalysts were characterized by specific surface area, atomic absorption, SEM-EDX, XRD, temperature programmed reduction (TPR), Raman analysis, scanning electron microscopy (STEM) and transmission electron microscopy (TEM).
Activation of cobalt species was followed by differential thermal and thermogravimetric analyses (DTA/TG) analyses and by specific surface area measurements which evidence the complete cobalt precursor decomposition at 450 °C, whatever the support composition and the en/Co molar ratio.
This can be verified by the specific surface area measured by methylene blue adsorption to be 0.913, 1.026, 1.268, 1.122, and 1.010 m2 cm-2 for PG/NF electrodes fabricated with the deposition time of 300, 400, 500, 600, and 700 s, respectively.
The adsorption of dyes and other organics from water is not only influenced by the specific surface area, but also affected by the hydrophobicity or the polarity of adsorbents.
Frustules of diatoms, single-cell photosynthetic algae largely diffused in aquatic environments, are mainly constituted by amorphous silica and are characterized by a specific surface area up to 200 m2/g [3].
It appears that the pyrolysis of methane is primarily affected by the specific surface area of the catalyst and not by the particular type of catalyst.
The formation of larger pore size is caused by formation of larger solid product, which is accompanied by decreasing specific surface area of the solid product.
